Part Number: TPS62822 Tool/software: Hi,
The regulator had a short issue, I checked impedance before power on the board the impedance was in the range, after power on within 5 seconds the PCB was shorted after that the impedance range is 0 to 1 ohm only…
Part Number: TPS62822 Hi Ti,
the tps62822 datasheet page11, 'To keep the fedback net robust from noise,set R2 equal to or lower than 120K to have at least 5uA', but my design the output is 0.6V, the FB PIN is tied to output directly, is the R2 still need…
Part Number: TPS62822 Hi team,
Can you let me know how the ILIM values are distributed? I understand it is Gaussian distribution, correct?
If you have specific data, please share it me h-hayashi@ti.com.
Best regards,
Hideki
Part Number: TPS62822 Hi expert,
Ilim is defined as High-Side FET Current Limit in datasheet, and it's 3.3A typ in case of TPS62822.
Does it mean the peak of switching current or something other (ex: valley current limit)?
https://e2e.ti.com/blogs_…
Part Number: TPS62822 Other Parts Discussed in Thread: TPS62823 , , TPS62821 We have a requirements for TPS62822/ TPS62823/ TPS62821 parts. As suggested by Excel Regidor in my earlier query, I have the get notifications option on TI store enabled, but the part…
Part Number: TPS62822 Other Parts Discussed in Thread: TPS62823 Hello Guys,
TPS62822 is currently out of stock and unavailable on any of our distributors. Is there an alternative with similar pin-outs since customer have already made his PCB design? …
Part Number: TPS62822 We have requirements for TPS62822DLCR (Qtt: approx. 600) and TPS62821DLCR (Qtt: approx. 600). They are non-stock on Digikey/Mouser/TI store.
Can you please let me know the lead time for these parts to be in stock with distributors…
Part Number: TPS62822 Hi
We are using TPS62822DLCT in one of our design. During debugging I observed that the impedance between VIN and SW pins showing dead short. What would be the minimum impedance between the pins?
Regards
Srikanth Kacchu
