Part Number: TPS62933O Tool/software: Hi, Ti,
Related design 3V3 out @3A. with chip set TPS62933ODRLR/
If we dont want PG pin in our application, than can i left this pin flot? or we have to do the pull up with <5V supply and why its required?
refer…
Part Number: TPS62933O Tool/software: In OAA mode, Vout drops by about 100mV every 27kHz. Can I eliminate drops? Vin = 15V
Vout = 4.4V
Cin = 23.5μ
Cout = 40μ
L = 10μ
Part Number: TPS62933O Tool/software: Hello,
i'm designing a power supply around TPS62933O which would power an audio DSP and ADC/DAC converters. I've opted for the TPS62933O for its out-of-audio feature. Can you check if i'm doing something wrong in…
Part Number: TPS62933O Tool/software: Hi team,
My customer want use TPS62933O(VIN 24V, VOUT 5.5V) which has OOA feature, datasheet specify SW frequency can always be >=30kHz.
But my customer test when device is in no load or light load(50mA),…
Part Number: TPS62933O When I verified the upper limit of Vout, if it was not enough, I first used an electrolytic capacitor as the carrying capacitor. I found that SW Fres. was not the 500KHz set in RT: Float, but 250kHz. When I switched to the MLCC…
Part Number: TPS62933O Tool/software: Hello,
We have implemented the "TPS62933ODRLR SOT583" IC in our product.
Our specifications are a 24V DC input and a 5V 3A DC output . However, upon testing our circuit, we observed that the IC is heating up to…
Part Number: TPS62933O Other Parts Discussed in Thread: TPS62933EVM Tool/software: Hello,
We will want to implement the " TPS62933ODRLR SOT583 " IC in our product.
Our specifications include a 24V DC input and a 5V 3A DC output. Kindly provide the…
Part Number: TPS62933O Other Parts Discussed in Thread: TPS62933 Hello, i am looking for some input on a design on two seperate rails from 24V, with 1117 LDO's for 3.3 and 5V, power sequenced.
4 layers stackup
Signal
Power (3.3V)
Gnd
Signal…
Part Number: TPS62933O Hi all,
I would like to make one request to use product sort page.
Could you make it possible to sort products with OOA (out-of-audio)?
I think if you add OOA in the item of [feature], It is possible.
It is still easy…