Part Number: TPS65133 Other Parts Discussed in Thread: TPS65132S , TPS7A20 , TPS7A30
please see attached application and power solution.
please let me know if it's good power solution to achieve the best op and adc performance.
please recommend power…
Part Number: TPS65133 Other Parts Discussed in Thread: BUF602 , , LM3671 , CC2650 , FDC2214 Dear TI experts,
Can the ±5V output of TPS65133 supply power to BUF602 a high speed unit gain buffer?
Sorry, this question might be too basic. According to…
Part Number: TPS65133 Dear TI experts,
I am designing a battery powered system that includes the TPS65133.
Is it possible to power the TPS65133 from the output of a subsystem with a Li-Ion Polymer battery in series with a 3.3V LDO linear regulator?
…
Hi Will,
Is it possible for you to disconnect the BUF602 and only connect maybe an electronic load instead? I suspect the BUF602 caused the load current changing.
And according to your video, the VNEG has raised up to higher than -4.5V and then the VNEG…
Part Number: TPS65133 Other Parts Discussed in Thread: BUF602 ,
Dear TI experts,
I'm designing a system using the TPS65133 to power a high speed op amp (BUF602).
In my application, Vi comes from 3.7V from a 350mah Lithium battery.
Currently, I ha…
Part Number: BUF602 Other Parts Discussed in Thread: TPS65133 , FDC2214 , TINA-TI Dear TI experts,
I have two questions about powering the BUF602.
First question, can I power BUF602 with TPS65133?
The TPS65133 is a ±5V output dual-rail DC converter with…
Part Number: TPS65133 Other Parts Discussed in Thread: OPA4134 , OPA2134 , Hi,
We have used the TPS 65133 in our design which providessplit rail power to 3x OPA4134 opamps and 1x OPA2134 audio amplifiers.
The TPS 65133 is capable of powering 3 of the 4 opamps…
Part Number: TPS65133 Hello Experts, Customer has question as follows. Would you please answer them? 1. What are the conditions for completing the efficiency curve on the spec sheet? EVM may vary, but it's around 63%@10mA. 2. Why do you recommend metal…
Part Number: TPS65133 Dear *,
can we use a Wirewound inductor eg.
NRS5030T4R7MMGJ
( ) with TPS65133? or do we need to use a iron powder inductor and why?
Best Regards,
David.