Part Number: TPS767D301-EP
this is my circuit using TPS767D301, if i do not connect the 5.0V input source, connect a 3.3V source to the VDD3V3 pin, because of the diode in the pmos device i can still have 1.9V output voltage for the DSP kernel and 3…
Part Number: TPS767D301-EP For PN# TPS767D301PWP we purchased this part from TI webstore.
But for the same part marking location is different as shown from below.
Left one has marking on the left side only when right one has marking in the center…
Part Number: TPS767D301-EP Other Parts Discussed in Thread: TPS7A88 As I can see TPS767D301MPWPREP on TI Website, it is still active.
But I got a notice from the authorized distributor that TPS767D301MPWPREP is LTB dated on Oct. 6th, 2024.
So can…
Part Number: TPS767D301-EP Hi Teams,
My customer used TPS767D301 as a power supply for C2000 for years. Due to their design fault, EN1 pin was floated in PCB. From the datasheet, To enable the LDO1, we need the EN1 is logic low. But even the it's…
Part Number: TPS767D301-EP I bought the part TPS767D301MPWPREP, the first line marking on it is "767D301EP", the second line marking on it is "69TG4",.the third line marking on it is“AEGY”
Can you suggest the date code of the part?
Looking forward…
Part Number: TPS767D301-EP Hi,
I had followed eZdspTM F28335 design for powering up TMS320F28335SPTPQ in my product. It is the first time power up of my board.
As per the IC functionality, reset time out is 200ms. In my design initial power up sequence…
Hello Uriel,
I would recommend taking a look at the TPS767D301-EP part. It is a dual-output low-dropout linear regulator with a 3.3V rail and configurable second rail (1.8V is an option). It is used in the TMS320F2808 reference design (which is a…
Part Number: TPS3306 Other Parts Discussed in Thread: SM320F28335-EP Hi TI AE,
I have a few questions on the voltage tolerances of each device (MCU, Watchdog IC, and LDO) all from Texas Instruments. It seems that we have wide tolerance on the TPS3306…
