Hi Conrad,
The Any-Out pints can control Vout in in 50mV steps from 0.8V to 3.95V. So you can approximate a sinusoid . One thing to keep in mind, the TPS7A85 can only source current. It can not sink. So Vout will only fall if there is a load on Vout…
Part Number: TPS7A85 BIAS pin requires 10uF or larger value. Is this 10uF effective capacitance value? EVM uses 10uF 16V capacitor. If this is not effective value requirement, please let me know the requirement value of effective capacitance.
Best…
Other Parts Discussed in Thread: TPS7A85 Regarding the TPS7A83000 and TPS7A85 LDOs, do we have information concerning the min/max or at least typical values for how long the EN rising and falling edges take to enable and disable the device, respectively…
Other Parts Discussed in Thread: TPS7A85 , TPS7A84 I found datasheet typo of TPS7A84 and TPS7A85. In datasheet P.6, I think the comment of VIL(EN) and VIH(EN) are reverse. I think it should become "VIL(EN) EN pin low-level input voltage" and "VIH(EN)…
Other Parts Discussed in Thread: TPS7A85 Hello, Can I change the vout of TPS7A85 dynamically by changing the ANY-OUT voltage setting pins? Best Regards, Ryuji Asaka
Victor,
I have imported the TPS7A85 unencrypted PSpice model into TINA-TI and had no such issues. My guess is that you have deleted one of the necessary PARAMS statements accidently. In this model, the only PARAMS: statements that needed to be deleted…
Part Number: TPS7A57 Other Parts Discussed in Thread: TPS7A85 Tool/software: Hello,
I'm upgrading a design that was using the TPS7A85 4A regulator. We will be drawing at least 3.2A per LDO, so to give some additional headroom I was thinking of switching…
Part Number: TPS74401 Other Parts Discussed in Thread: TPS7A56 , TPS7A57 , TPS7A85 , TPS7A54 Tool/software: The TPS74401 can be connected in: Parallel connection of multiple TPS74401 devices? Thanks for your help
Ignazio Lax
Part Number: LMK04828 Other Parts Discussed in Thread: TPS7A85 , LMK04832
Hi ,
I have the below design query regarding LMK04828, I have a stringent requirement and i cannot have VCO/Any spurs coupled into my output.
1) Is High PSRR LDO required…
Part Number: TPS7A85A Greetings,
first of all, thanks for updating the calculation file for parallel LDOs.
I was trying the latest version but, with the same parameters, i am experiencing large calculation differences compared to the previous version…
