Part Number: TSM102 The TSM102 datasheet shows the typical output voltage level when the Vcc rail is at +30V. Is there any data or charts as to what the output levels are when powered with +5V?
Robert,
If the output is not loaded beyond what the schematic shows, then the output current is about 10uA out of the TSM102 (-10uA on chart).
At this load current the output can get very close to ground.
This is VOL vs. IOL for an input voltage…
Part Number: TLV3011B Other Parts Discussed in Thread: TL103W , TSM102 , REF3325 Hi team,
As title, do we have function similar but REF voltage level is 2.5V?
Thanks
Part Number: TSM102A Other Parts Discussed in Thread: TSM102 , TL431 , LM339 , LM358 Support, The TSM102 datasheet doesn't spell out how to connect unused Op-amps and Comparators. How should they be connected? I've read some datasheets that say to never…
Hello Catarina,
Actually, the TSM102 would be the replacement for the LM613, as the LM613 has two comparators and two op-amps and a reference.
Functionally they are nearly identical. The TSM is a somewhat improved device, but there are differences…
Hi Hen, We don't have anything that will meet 100uA current consumption, but the following devices do support a wide input voltage range: TSM102 TL103W, TL103WA LM10 The TSM102 and TL103W are more modern devices that will likely fit your needs better…
Hello Muhammad,
The dual op-amp and comparator combos are rather limited. We have not seen a big demand for combo units.
We do have some combo quads (two comparators and two op-amps and a reference), such as the TSM102.
We now have lots of tiny…
Yeojag,
If you need two amps to be a comparators, then the TSM102 would be a better choice as it has two amps and two comparators plus a shunt regulator.
The TSM104W op amp can be used as a comparator because the input difference voltage is not limited…
