Part Number: TUSB1105 Other Parts Discussed in Thread: TUSB2551A Customer is looking for alternate for the Approved TI Part TUSB1105RGTR which offers lesser lead time and have same footprint.
Can you suggest p2p alternate with better component supply?
Part Number: TUSB1105 Other Parts Discussed in Thread: HALCOGEN Hi Team,
Our customer is requesting for the Halcogen usb cdc example worked.zip from the wiki link below. Can you please share a copy?
https://processors.wiki.ti.com/index.php/File:Halcogen_usb_cdc_example_worked…
Hi Alex,
The test load shown in the datasheet for the TUSB1105 is a real world USB load (with 1.5K pu / 15K pds, etc) instead of just a capacitive load. This indicates the transceiver was verified as a part of a regular USB application instead of…
Hi Mathias,
I think we should not use TUSB1106 instead of TUSB1105.
The reason is, TUSB1106 supports only differential mode but here we are operating TUSB1105 in single ended mode(by grounding Mode pin of TUSB1105). This is basically because of RM46L852 USB…
Part Number: TUSB1105 Hi
I have a Special design,used 2 pcs TUSB1105, connect a usb device to a host.Just like a keyboard connect to a PC. In my Schematic,U85 connect to a keyboard ,U86 connect to PC. Please help to check is it able to work ？
Other Parts Discussed in Thread: TUSB1105 Hello,
We find the fail parts on customer side. Below is schematics of TUSB1105. Has any issue on below schematics? Thank you.
BR
Patrick
Hi Koji Ikeda,
No you cant use TUSB1106 instead of TUSB1105, because TUSB1106 supports only differential mode but here we are operating TUSB1105 in single ended mode(by grounding Mode pin of TUSB1105). This is basically because of RM46L852 USB host controller…
6201.TUSB1105RGTR.pdf
Dear all,
My customer made static valuation of their USB product using TUSB1105RGTR.
And they found out about incidence of the suspend through radiation of 8kV indirect discharge.
Please teach me about improvement plan.
Best regards…
Sorry to re-open an old thread, but I'm having exactly the same problem.
Can someone please advise the contents of the direct e-mail?
To reiterate, sometimes the 3V3 reg does not come up, even though the 5V is present (from the bus) and VCCio is connected…
Other Parts Discussed in Thread: TUSB1106 , TUSB1105 , TUSB3410 , TUSBWINVCP I have a device with UART output (TX, RX , RTS , DTS ... etc) and I want to connect to a USB 2.0 interface . The problem is that my device works at 3.3 V and 5V USB is powered by t…
