Part Number: TUSB1210EVM Other Parts Discussed in Thread: TUSB1210 Hi all
My customer is evaluating the performance of TUSB1210 based on the evaluation board.
However, they found that the actual board is different from the description in the TUSB1210 EVM…
Part Number: TUSB1210EVM Other Parts Discussed in Thread: TUSB1210 How can I change VDDIO to 3.3V? On EVM schematics it is firmly connected to 1.8V. Is it enough to cut the trace and manually solder a wire to pin 32?
Part Number: TUSB1210EVM Dears
In the TUSB1210EVM User Guide , Figure 3 is as follows: Input signal (ULPI interface) termination resistor, why use 22Ω?
Can you help me to see if usb.pdf is reasonable and what needs to be modified?
Thanks a lot. …
Other Parts Discussed in Thread: TUSB1210 Hello,
could you please explain why on the TUSB1210 EVM there is a capacitor (C22) connected to pin nr 8 of TUSB1210 ?
Thanks.
Part Number: TUSB1210 Hello, I am attempting to configure a Xylinx ZyncUltrascale+MPSoC FPGA + TUSB1210EVM as a mass storage device, but the device is not recognized by the host PC. After programming the FPGA to the TUSB1210 appears to send RX CMDs continuously…
Part Number: TUSB1210 For my design, implementing both Case 1 and Case 3. For Case 1, using a TUSB1210 PHY to interface between a PC Host and a FPGA via the PHY ULPI pins, and for Case 3 I use another TUSB1210 PHY to interface between an FPGA and an external…
Hi Paul:
There is one I remember testing on, unfortunately I can't find the exact model or board that it was. It would take me a while to go back and dig it up. But there should be a few other valid ULPI PHY options. EVM or Chip
We have a really comprehensive…