Dear All
Could you advice about attached schematic? I am worried about two points of follows. ・ The B side is not SoC in conformity with Wi-Link-6. ・ Unused pin is Open. (If it need Pull Up/Down,please let me know)
Thanks
Best Regards
Tomohiro Nagasaw…
Part Number: TXS0206A Other Parts Discussed in Thread: TWL1200 , TXS0206 Hi team,
My customer want a 3.3V ,50MHz SDIO redriver,
I see many of you proposing voltage translator like TXS0206 or TWL1200,
But aren't those translator and buffer? can they implement…
Other Parts Discussed in Thread: TWL1200 Hi, I'm looking for dimensions for the YFF package of the TWL1200. Dimensions D and E are missing from the drawing on page 32 of the datasheet.
Other Parts Discussed in Thread: TWL1200 Hi All.
We're considering the usage of the TWL1200 level shifter to connect a WiLink6.0 based WIFI+BT combo solution (with 1.8V I/O) to a host SoC that operates @ 3.3V levels.
WiLink6.0 requires a reference…
Other Parts Discussed in Thread: TWL1200 Hello,
We ave using the TWL1200 to interface 3.3V SDIO to 1.8V SDIO. We are not seeing the full voltage swing on the 3.3V SDIO interface. Any thoughts on why it's not driving to the 3.3V rail?
Thanks in advance…
Hi Khemraj,
I am not sure what the specifications of each of those signals are. I would suggest starting with the Buffer/Driver/Transceiver family of parts and then using the parametric search to narrow down the options here: www.ti.com/.../products…
Hi Abhi,
In terms of the operation, this device is application specific to MMC. But, we understand that there are various requirements as the standards evolve.
I have attached a ppt which could be useful for us and hopefully for you to evaluate the right…
Hi,
I am able to probe the WLAN with mmc4.
Did the following changes,
1) Manually enabled the WLAN_EN on TWL1200-Q1.
2) Did the following changes on dts file (dra7-evm.dts),
&mmc4 {
max-frequency = <1000000>;
wlcore: wlcore@2 {
…