Part Number: TXU0101-Q1 Other Parts Discussed in Thread: SN74AXC4T774 , SN74AUC1G17 , SN74AUC1G125-EP , SN74AXC8T245 Hello TI Experts,
I am using TXU0101-Q1 to translate a 3.3V single-end signals to 1.8V, below is the schematic for your reference.
The McBSP_SCLK…
Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TXU0101 , Tool/software: Hi TI team,
We are planning to use the Level tanslator( TXU0101 ) between the processor and Speaker PA (TAS6424E-Q1) to translate the logic level of the signal. Please refer…
Part Number: SN74LV1T126-Q1 Other Parts Discussed in Thread: TXU0101-Q1 Hi team,
Under following condition, how much current consumption is when OE is low level?
V_cc=5.0V,
V_in=3.3 V
Best Regards,
Shoji
Part Number: SN74LV1T126 Other Parts Discussed in Thread: SN74LVC1G126-Q1 , SN74AHCT1G126-Q1 , TXU0101-Q1 Team,
Would like to check if we have Q-grade spin for SN74LV1T126, or any similar alternative, to suit customer's automotive design that requires AEC…
Part Number: TLIN1021A-Q1 Other Parts Discussed in Thread: TXU0304 , TXU0202 , TXU0101 Hi,
We are using TLIN1021A-Q1 transceiver in our design for LIN interface. Our processor has 1.8V, lin interface is of 5V. Please suggest a level translator for lin interface…
Part Number: AM26C31 Other Parts Discussed in Thread: ESDS314 , AM26LV31 , AM26C32 , AM26LV31E , TXU0104 , TXU0102 , TXU0101 , TXU0304 , CD4010B , TXH0137D-Q1 Hello Community,
We are selecting ESD & EOS protection for our RS4xx use case. We anticipate a fairly…
Part Number: CD74HC4040 Other Parts Discussed in Thread: TXU0101 , 2N7001T
At present, the project needs to test the 26MHz CLK signal. There are the following issues with manual environment testing. Please help analyze and confirm. Thank you! 1. Can't measure…
The DIN input of the TCA5405 must never float. So with this two-transistor level converter, you always need a pull-down resistor.
The TCA5405 activates when it detects a high-to-low edge at its input. (So the idle state should be high.) If the 1.8 V powers…
