Part Number: TXU0104-Q1 Tool/software: Hello Team, We are using the IC TXU0104-Q1 to level shift SPI signals of 3.3V to 5V logic.
The slave out pin is not used in the system.
The 3.3V side is connected to the VCCA and 5V is connected to VCCB.
Can you…
Part Number: TXU0104-Q1 Other Parts Discussed in Thread: SN74AHCT125-Q1 Tool/software: Hi Teams,
Can I use TXU0104-Q1 to level shift the 3.3V PWM signal from CPLD to 5V gate driver?
Can you kindly help to provide your recommendations for this requirement…
Part Number: TXU0104-Q1 Tool/software: Hi,
We plan to use the txu0x04 as a TDM signal buffer, which means that the a and b ports have the same voltage. In this case, is there no difference between the two ways in my diagram below?
Part Number: TXU0104-Q1 Tool/software: Hi,
I plan to use P/N TXU0104QPWRQ1 , and I have a question regarding the configuration:
The device should translate low-speed Single-Ended signals from 1.2 [V] (left) to 5 [V] (right).
In this case VCCA is connected…
Part Number: TXU0104-Q1 Other Parts Discussed in Thread: TXV0106-Q1 Tool/software: Hi Team,
We are planning to use TXU0104-Q1 for CAN FD interface for 1.2V to 3.3V/3.3V to 1.2V translator. Is it suitable to use for CAN FD interface?
Also, please suggest…
Part Number: TXU0104-Q1 While probing the Ti level shift ckts between 1.8v and 3.3v rails, the 3.3v to 1.8v signals showed the output voltage is higher than 1.8v. Its likely that my probe placement slipped and short circuited something in one of the IC…
Part Number: TXU0104-Q1 Other Parts Discussed in Thread: TXU0104 Hi,
What is minimum current required on the input pin of TXU0104?
Best Regards, Shafeeq
Part Number: TXU0104-Q1 Other Parts Discussed in Thread: SN74LVC8T245-EP Hello,
I am looking for a 60MHz 1.8V LVCMOS to 5V logic level shifter (4.5V Vih). None of TI's space-qualified logic family seems to be able to do this, as they all operate in 3…
