Search tips
Showing 28 results View by: Thread Post Sort by

  • TXV0106-Q1:TXV106-Q1 Leakage voltage

    Part Number: TXV0106-Q1 Tool/software: TXV106-Q1 Leakage voltage The power supply voltage of the TXV106-Q1 is 0V. When 3.3V is applied to Ax or Bx, a voltage leakage of 2.9V was confirmed at VCCx. Is this behavior correct? The TXV106-Q1 should have…
    • Answered

  • TXV0106-Q1: Okay to short OEb input to GND?

    Resolved
    Part Number: TXV0106-Q1 Tool/software: Hello, I'm planning to use the TXV0106-Q1 on a platform where I do not need the OEb pin and the default VCC Isolation feature is sufficient for my needs to keep the IO high-Z during power up. I was planning to…
    • Resolved

  • TXV0106-Q1: Unused Input and output

    TI Thinks Resolved
    Part Number: TXV0106-Q1 Hi team, Could you please advise how to terminate the unused input and output pin? Is it OK to just let them OPEN? regards,
    • Answered

  • TXV0106-Q1: The effects of overshoot on chip input pins

    Resolved
    Part Number: TXV0106-Q1 Tool/software: Hi Teams： Due to the limited PCB layout space, we have not placed termination resistors at the signal source end, and we also cannot reduce the driving capability of the output, which affects the signal's edge…
    • Resolved
    • Answered

  • TXV0106-Q1: RGMII trace length

    Resolved
    Part Number: TXV0106-Q1 Other Parts Discussed in Thread: TXV0106 Hi Team, We are designing TXV0106 in RGMII and want to double check if this device can support 150mm trace length. We know there are some parameter will impact the result, but in general…
    • Resolved
    • Answered

  • TXV0106-Q1: Output channel to channel skew and duty cycle variation

    Resolved
    Part Number: TXV0106-Q1 Tool/software: Hello team： I have some questions about the output channel-to-channel skew and duty cycle variation described in the datasheet: 1. How are these two parameters measured, and what methods are used to obtain the…
    • Resolved

  • TXV0106: There seems to be an error in the datasheet. (Including TXV0106-Q1)

    TI Thinks Resolved
    Part Number: TXV0106 Other Parts Discussed in Thread: TXV0108 Tool/software: Hello. As written in the title, I would like to request a review because it appears to be an error in the data sheet. (descriptions that has a fixed direction but is treated…
    • Answered

  • TXV0106-Q1: Max Data Rate for RGMII 2.0

    Resolved
    Part Number: TXV0106-Q1 Hello, I wanted to confirm the max data rate for this part? In one location you say max data rate of up to 500Mbps for 1.65 to 3.6V. In another you say 250Mbps/channel for RGMII 2.0. Can you please confirm this port supports…
    • Resolved
    • Answered

  • TXV0106-Q1: TI IBIS-AMI Model Request_TXV0106-Q1 & SN74AVC2T45-Q1

    Resolved
    Part Number: TXV0106-Q1 Other Parts Discussed in Thread: SN74AVC2T45-Q1 , Please provide IBIS model and project details as follows Device name of the model you are requesting : SN74AVC2T45-Q1 TXV0106-Q1 Project details : For simulating a…
    • Resolved
    • Answered

  • SN74LV6T17-Q1: Level-Shift between 5V MCU and 3.3V ETHER-PHY

    Resolved
    Part Number: SN74LV6T17-Q1 Other Parts Discussed in Thread: TXV0106-Q1 , Tool/software: Hello, Team, Our customer is looking for a level shifter which could handle 5V MCU IO and 3.3V ETHER-PHY IO. We found TXV0106-Q1 as a recommended device for such…
    • Resolved

Didn't find what you are looking for? Post a new question.