Part Number: ESD321 I need advice on ESD protection for a USB connector on the front user panel of my design.
My design has 2 boards; a panel-board and main-board. The main-board has an STM32F373 with a USB-C connector as well as ESD321DYAR diodes for…
Part Number: TLK10034 Other Parts Discussed in Thread: MSP430F5529 Hi
I am trying to use USB-2MDIO GUI to talk to TLK10034. The LaunchPad I use is MSP430F5529.
I connect external 1.8V to the MSP430F5529.
When I try to read or write through GUI, it always…
Part Number: DCA1000EVM
Hi E2E,
I just downloaded mmWave 2.1.1.0 and I have this error when opening it. I made sure to download MATLAB runtime R2015aSP1 (8.5.1) and the XDS Emulation Software.
...
[03:53:35] Matlab Runtime Engine is installed [03:53:35] [RadarAPI…
Part Number: MSP430FR6989 Other Parts Discussed in Thread: USB-2-MDIO , , MSP-EXP430F5529LP Hello,
I would like to use the MSP430fr6989 development kit to connect to the USB-2-MDIO software to test the DP83867ERGZR ethernet PHY. Can this be done? In the…
Other Parts Discussed in Thread: TUSB1310 Hi.
We are looking for transceiver which supports for both USB 3.1 Gen 1 and USB 2 for the Combo Hub application with the PIPE as 32-bit SDR,
Could you please suggest regarding the mentioned for this.
Thanks, Joshua…
Part Number: DP83869HM Other Parts Discussed in Thread: USB-2-MDIO Hi there
I use a DP83869HM connected to a AM64 over RGMII and want to make compliance tests. I've cut the MDIO lines open and connected a MSP430 Launchpad to the PHY as described in SNLA239B…
Part Number: MSP430F5328 Other Parts Discussed in Thread: USB-2-MDIO , DP83TG720EVM-MC Hi,
A customer of mine built his own board with DP83TG720S and he wants to use a MSP430 to program the PHY via MDIO. So the same approach as on the DP83TG720EVM-MC. Is…
Part Number: BQ25703A Hello, I was reading the datesheet of BQ25793A . I am looking for implementation of this IC to charge a 2-S lipo battery
But my doubt is if I could use this IC without MCU, I mean I would like to use only the BQ2579A with an USB-C…
Dharrvin
You can use either 100nF or 220nF for SSTX1 and SSTX2.
Does the FLIP pin change its voltage for the normal and flip Type-C orientation? You should see 0V on FLIP pin for the normal orientation and 3.3V for the flip orientation.
For USB3.2 Gen2…