Search tips
Showing 84,125 results View by: Thread Post Sort by

  • RE: CC2500: CC2500 + CC2592

    Hi, The spectrum looks normal in Zero Span for Freq hopping mode. Those spurs show up because of the RBW setting of the Spectrum Analyzer. This is not a valid test for testing FCC band edge requirement. For FCC band edge measurements, you can transmit…

  • RE: Unable to calibrate WL1273L - fail with radio status -90

    Hi Gigi Joseph, Sorry if I wasn't clear - yes I followed the calibration process. The logs are below along with the steps I used to try to calibrate the module. I've tried using both the .ini file supplied by LSR and the one from TI that comes with…

  • RE: CCS/TMS320C6713B: undefined identifier

    Thanks ki and Randy P for responding. I searched for this code and got it when i visited a link which was mentioned in one of the questions asked on this platform only. I completed the code and could compile it also . I further included c6713dskinit…
    • Answered

  • [FAQ] TAS Devices Information

    Resolved
    Other Parts Discussed in Thread: TAS5103 , TAS5706 , TAS5706B , TAS5142 , TAS5342 , TAS5611 , TAS5613 , TAS5342LA , TAS5342A , TAS5342L , TAS5404Q1EVM , TAS5614 , TAS5558 , TAS5538 , TAS5615 , TAS5630 , TAS5630PHD2EVM , TAS5704 , TAS5602 , TAS5707 , TAS5707A…
    • Resolved
    • Answered

  • RE: TMS570LS3137: OSCILLOSCOPE plots of EMIF A0 to A15 ( Address line EMIF BA1 to EMIF A14 ) and I found an deviation from specification on TMS570LS3137

    Resolved
    Hi Mr.Q J Wang , Response to the SECTION 3 : All Oscilloscope Plots have following signal information SIGNAL7 = DATA1 SIGNAL6= DATA0, SIGNAL 5= WE#, SIGNAL 4= CS2, SIGNAL 3= A2 (A3 of flash), SIGNAL 2= A1 (A2 of flash), SIGNAL 1 =…

  • RE: Inconsistent Startup using tcp_socket app on cc3200

    Hi Joseph, Actually, this is a new feature of SDK1.2, You can find the description in CC3200-SDK_Realease_Note.pdf at chapter 15. For ease of use, the CC3200 SDK latest package provides separate configurations of simplelink library for development…

  • TS5A3154: Open/short measurement design

    TI Thinks Resolved
    Part Number: TS5A3154 Other Parts Discussed in Thread: LM2904 , LM334 , , TS5MP646 Note.xlsx OPENSHORTV02-20200820.pdf Hi TI: Hope your support to review the design as attached file,which designed to measurement the voltage of Pinx's D1&D2 for DUT…
    • Answered

  • EVMK2GX: How do I enable GPIO on J12 header?

    Resolved
    Part Number: EVMK2GX Hello, I’m working with the EVMK2G evaluation board ( http://www.ti.com/tool/EVMK2G?keyMatch=EVMK2G&tisearch=Search-EN-everything&usecase=part-number ) trying to direct three pins to work as GPIO on the header J12. My starting…
    • Resolved

  • HDVPSS Firmware does not install in custom Dm8168 board

    Other Parts Discussed in Thread: PMP Dear All, We are struggling in the VPSS firmware installation in custom DM8168 board. Please find the kernel log below: ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux-2.6.37 Image Type: ARM Linux…

  • RE: EZSDK 5.04 to 5.05 migration produces "notify_shm_drv_sendevent failed! status = 0xfffffff2"

    Dear Pavel, We are struggling in the VPSS firmware installation in custom DM8168 board. Please find the kernel log below: ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux-2.6.37 Image Type: ARM Linux Kernel Image (uncompressed…

Didn't find what you are looking for? Post a new question.