Search tips
Showing 35 results View by: Thread Post Sort by

  • XTR200: XTR200 in voltage mode with pull-up resistor

    TI Thinks Resolved
    Part Number: XTR200 Other Parts Discussed in Thread: XTR300 We are using the XTR200 to produce a 0-5V output for a sensor application. A customer would like to interface this to a PLC which has a pull-up current of 20uA to 5V on it's input for open circuit…
    • Answered

  • XTR200: XTR200, 0-10V output.

    Resolved
    Part Number: XTR200 Other Parts Discussed in Thread: TLV9001 , AMC1351 , OPA310 , OPA320 Hi guys. I'm trying to build an isolated 0-10V circuit using an XTR200 and an AMC1351QDWVRQ1. Schematic is as follows: Circuit is working good but with the…
    • Resolved

  • XTR200: Can XTR200 support magnitude of the input voltage, regardless of polarity

    Part Number: XTR200 Dears: Customer input voltage is +/-0.1V, Can XTR200 support magnitude of the input voltage, regardless of polarity? They want the negative input voltage has the same output with positive voltage.
    • Answered

  • XTR200: XTR200 power supply

    Resolved
    Part Number: XTR200 Hi, The XTR200 is specified for a supply voltage from 8 V (min) to 60 V (max), p.4. Will it still work with a 5 V power supply? thank you for your feedback Marcel
    • Resolved
    • Answered

  • XTR200: XTR200 Availability

    Resolved
    Part Number: XTR200 Other Parts Discussed in Thread: XTR111 , Tool/software: We are currently redesigning our 4..20mA / 0..10V customer Interface. Currently we use XTR111 with a bunch of external components, which could all be eliminated with XTR200.…
    • Resolved

  • XTR200: PSPICE MODEL is not showing correct current consumption in voltage mode

    TI Thinks Resolved
    Part Number: XTR200 Hi.. I am proposing XTR200 to one of my customer for Voltage & current outputs. When we tried voltage output mode simulation with TI PSPICE, we observed that current through RSET is too high. As per the datasheet Q1 must not conduct…

  • XTR200: OUTPUT PROTECTION CIRCUIT

    TI Thinks Resolved
    Part Number: XTR200 Hi Can you suggest a voltage and short-circuit protection circuit for the XTR200 operating in current mode? BR Gilberto

  • XTR200: PWM Input

    TI Thinks Resolved
    Part Number: XTR200 Hello, Are there any app notes or design guides available for XTR200 using an PWM input? Anything to consider? Filter required? ... Regards, Viktor
    • Answered

  • XTR200: Impedance of SET pin during OD high.

    Resolved
    Part Number: XTR200 I use attached schematic to have a mutlifunctional pin for AI and AO. When AI 4..20mA mode is chosen we have 5V on the Gate of Q12007 and OD is high. The design intent is that the current through the 120 Ohms resistor is measured…
    • Resolved
    • Answered

  • XTR200: VSP headroom

    Resolved
    Part Number: XTR200 Hello, My csutomer is intereated in XTR200 and asking me if it can realize 11V OUT. The datasheet specifies the headroom as 2.3V max with only VOUT=10V and 25mA case. And it also says that 2.5V headroom is requried for some other…
    • Resolved

Didn't find what you are looking for? Post a new question.