let me know if you get stuck
first thing with the Launchpad and BoosterPacks is to make sure you set the jumpers and switches correctly.
from the Kit Readme First
LAUNCHXL-F28069M
i. Remove Jumpers 1 and 2 to isolate USB and power from BOOSTXL…
Hello Sunil and cb1,
As cb1 stated, his prior guidance of How to interface a Display to an MCU is as good a guide as any.
If you are new to LCD development, starting with the BoosterPack and using the TI examples offered via the DK-TM4C129X or using…
Part Number: TCAN4550 Team e2e,
I am trying to use the DEMO code of TCAN4550 to send 2 different WUP on a CAN bus (having 2 nodes) by pushing switches S1 and/or S2. If we run the DEMO code, the WUP is transferred continuously until the reset button…
what is the error?
did you follow the jumper settings for the Launchpad?
For typical use the following settings should be used
LAUNCHXL-F28027F
i. Remove Jumpers 1, 2, 3 to isolate USB and power from BOOSTXL-DRV8301
ii. S1 set to ON-ON-ON to…
McKenzie Keith said: On the one hand you seem to suggest that I am not making good use of the full range of ADC inputs for voltage
Right I'm saying the voltage peaks are nowhere close to MSB if that is 30% OVH. Seems much greater than PDF loosely worded…
Other Parts Discussed in Thread: DRV8301 , MOTORWARE , LAUNCHXL-F28027F HIi I am using the DRV8301 BoostXL and C2000F28027f launchpad.
with the help of motorware and G.U.I. I can able to spin the motor and had try all motorware lab project successfully…
Part Number: BOOSTXL-CC2650MA Other Parts Discussed in Thread: CC2650 , SIMPLELINK-SDK-BLUETOOTH-PLUGIN I am working with the MSP432P401R Launchpad and CC2650 Module BoosterPack.
At first I tried the ' project zero ' from SIMPLELINK-SDK-BLUETOOTH-PLUGIN_1…
Part Number: BOOSTXL-DRV8305EVM Other Parts Discussed in Thread: MOTORWARE Tool/software: Code Composer Studio Hello,
I had my motor spinning using proj_lab02b then I has some issue I could not resolve. So I clean out everything and reinstall CCS and…
the warning is not a problem. You can right click on the project, go to properties, and choose the compiler you have installed.
The error says you aren't able to connect USB-JTAG to the device. Typically because it is not powered.
Are you powering…
will you please check your switch settings on the LaunchPad
the attached (has been missing) can be added to
C:\ti\motorware\motorware_1_01_00_11\docs\boards\kits\docs\
From Page 4 (this is with the BoosterPack attached and power being provided from…
