Part Number: ADC3244 Other Parts Discussed in Thread: ADC3444 There is an ADC3244 input signal called SYSREF. Your data sheet only vaguely references it and only mentions it in passing which is really pathetic. So also there is no mention of how to drive…
Part Number: ADC3244 Hello,
On page 48, in section 9.31 the data sheet for the ADC3244 (and other ADCs) says,
"9.3.1 Analog Inputs
The ADC324x analog signal inputs are designed to be driven differentially. Each input pin (INP, INM) must swing…
Part Number: ADC3244 Hi
The datasheet (SBAS671B) page 48 section 9.3.2 states "the device clock inputs can be driven differentially or single-ended, with little or no difference in performance between them." The following page states "However, for best…
Are you using an adapter to go from HSMC connector to the FMC on the FPGA platform? The ADC3244 EVM is equipped with an HSMC connector for the LVDS signals.
For the LVDS interface I'm not sure I understand how you are not achieving frame alignment.…
Part Number: ADC3244 Hello,
I'm trying to use raw ADC count data to get spectral plots corresponding to those in the data sheet. Seems simple but my noise floor is about 40 dB off from that of the data sheet plots on a dBFS scale. So, I terminate the…
Other Parts Discussed in Thread: ADC3244 I am interesting in "ADC3244" and reading it's datasheet. There is a information which I do not get it in datasheet. The default setting of digital data output is one wire or two wire.
Part Number: ADC3244EVM Other Parts Discussed in Thread: ADC3244 Hi,
We currently use 2 ADC3244 ADCs in a dual receiver architecture. We are experiencing an issue with receiver B not working during startup due to synchronization issues. Our start-up…
Hi Sima,
First of all, I recommended the discrete solutions(OPA855 and OPA859) below r eferring to their APD specifications and OPA855's application. Is there any problem?
LM5158-Q1(Power for APD) -> APD -> OPA855-Q1 and OPA859-Q1 -> THS4541-Q1 -…
Part Number: ADC3244EVM Other Parts Discussed in Thread: ADC3244 Hi team,
Please help the customer with issue bellow.
there is not a clock oscillator available on this board. I have to connect a 125MHz clock to this board from an external clock source…
