Hello Yu-Hung,
The slowest achievable data rate with the ADS1278 would be about 39SPS with CLK = 100kHz (Low-Speed Mode, CLKDIV = 1).
If your application only requires 10SPS to 100SPS, you may want to consider our lower bandwidth devices:
ADS1220…
Nicolas,
Please excuse my delay. The 3458 is a meter that was used in my lab. The is a high accuracy meter where I can control the number of power line cycles it measures. Since my PLC is 60Hz in the US I made measurements with 6 PLC which is equivalent…
Other Parts Discussed in Thread: DAC1220 , ADS1262 , DXP , ADCPRO I bought a DAC1220EVM module and want to evaluate it using the DXP software. Can I just buy another ADS1262EVM-PDK and use the MMBO motherboard for evaluation of the DAC1220EVM? I don't…
Hi Kjetil,
Welcome to the TI E2E Forums!
You are likely seeing noise coming from both the sensor and the voltage source used to excited the sensor.
For sensor noise, about the only thing you can do is filter this noise, either in the analog domain…
Hi Fábio,
Fabio Oliveira said: so, based on all this, i'm assuming that remote sensor as a reference. But, as you said, it's not a very perfect reference, so I will try to do my best...
Apart from being an accurate sensor, is it measuring the same…
Part Number: ADS1232 Other Parts Discussed in Thread: ADS1131 , ADS1262 , ADS1261 Hi,
On a weight scale product based on ads1232 reference design I did an experiment to reverse the polarity of excitation and have measures from 0 up to 50 Celcious. I…
Hi Ganesh,
For seismic exploration, the ADS1281 and ADS1282 are the devices that we recommend for that application. Typically, some of the main concerns are the ADC's AC performance and power consumption, and these devices are optimized in those areas…
After reading this:
www.element14.com/.../roadtest-texas-instruments-ads1262-evaluation-board-hw-review-part-1
It may well be the having Labview installed... I'll wait for someone to jump in and confirm it.
Part Number: TPS25750 Other Parts Discussed in Thread: BQ25792 , , TPD6S300 , TPS54531 , TPS25751 , ADS1262 , TPS54120
Tool/software:
Hello Sir/Madam Please help us to check our schematic ( attached as pdf ), we are using TPS25750 + BQ25792 + TPD6S300…
Hi Pascal,
Thanks for the information. One thing that I should have explained is that even if the LTC code is valid, unless the device either comes direct from TI or through our distribution partners there is no guarantee that the devices are good working…
