The best modulation code for this radio is the GFSK. The different codes are data rate dependent. GFSK works at all the data rates.
In terms of range it depends not only on your radio's output power in this case +11 dBm, but the type of antenna you…
Other Parts Discussed in Thread: CC1120 , CC1190 Hi all,
I've just completed a revision to a board using the AIC3204 with a CC1120 radio and C1190 LNA/PA and I have an issue with what appears to be noise coupling into the microphone input and being…
Part Number: CC1310 Other Parts Discussed in Thread: CC1190 , SYSBIOS , CC2650
Tool/software: Code Composer Studio
Hey guys,
I use CCS Version: 8.3.0.201810301800 Build id: N201810301800 and I recently downloaded and installed the 3.10.00.11 for…
The documentation of the GPIO settings is only found in a preliminary CC2520 datasheet and does not say anything more than what I wrote in the last post.
Using CC2520 GPIOs to control CC2591 is easiest and require less programming but it's not a problem…
What PHY are you using?
I believe the PHY is IEEE 802.15.4 on a LAUNCHXL-CC1310-CC1190-US development board. Does that sound right?
Can you post your RF settings?
The two files below are the characterize the RF settings. They were generated by Smart…
Other Parts Discussed in Thread: CC1020 , CC1190 1. We discovered if GSM device transmitting nearby (10-20cm) CC1020 PCB on 869MHz, its PLL jumps abnormal LOCK / UNLOCK (hardware monitored LOCK CONT pin). The same problem when project is enclosed in strong…
Other Parts Discussed in Thread: TEST2 , CC1125 , CC1190 Hi, I'm currently working on a RF project. I use only one way communication. I used CC1110 at both transmitter and receiver side and at the receiver side i used CC1190 Range extender in order to…
I have an ISR based on the solution I found in Dung Dang's Application Report SLAA459 to handle WOR on the CC430. I have it set up so that the EVENT0 interrupt enables the 'packet complete' and the 'LNA_PD' interrupt. The idea from the App Note is that…
