Other Parts Discussed in Thread: CDCVF2505-Q1 , CDCVF2505 , CDCLVC1104 Hi,
According to Datasheet of CDCVF2505-Q1, output jitter is defined as shown below.
However, it seems that there is no requirement for input clock jitter to obtain proper output…
The propagation delay time of the CDCVF2502-Q1 is function of something referred to as the "delta" load on the CLKOUT pin, shown in the data sheet , Figure 1.
I get that this is the difference between the capacitance on CLKOUT and on the drivers, but…
Hello Ricardo
The device is active. We are working on fixing the broken link on ti.com. Please find attached the datasheet.
Best regards
Puneet
scas867.pdf
Part Number: LMK00804B-Q1 Other Parts Discussed in Thread: CDCVF855 , CDCVF2505 Hi Sir,
May I know how could LMK00804B-Q1 design the delay time to meet our requirement as accurately 1.8ns delay?
Thanks
Hi Tim,
Q1: Now the customer add a 1.3V bias voltage to INN pin, and the Vac_ref pin is connected
a 0.1uf capacitance to GND like the customer's above schematic. then CDCLVP1102 can
output the clock signal.
You mean the Vac_ref pin can be…
Hello Fukazawa-san
Thanks for letting us know, we will get it fixed. For the time being, I attached the datasheet with this message.
Best regards
Puneet
cdcvf2505.pdf
Other Parts Discussed in Thread: CDCVF2505 Hi,
Let me ask you following questions about CDCVF2505 please.
Q1) Input signal condition
When an input signal which has around 300ps jitter is inputted to CDCVF2505, the output jitter performace can be…
