The EVM was never designed to meet any kind of PFC requirement so my slightly educated guess would be somewhere between 0.3 and 0.5, especially considering the input capacitor is relatively large to keep the input ripple on the bulk voltage within 25…
Part Number: DP83TD510E Other Parts Discussed in Thread: MSP430F5529
FAQ – Does my DP83TD510E need to be initialized to establish link?
The DP83TD510E is a 10Base-T1L PHY that can link between devices up to over 2km of SPE cable. TI’s preproduction…
Part Number: AM3358-EP
Processor : AM3358BGCZA80EP NAND : MT29F8G08ABACAH4-IT:C TR SDK:ti-processor-sdk-linux-am335x-evm-08.02.00.24 SYSBOOT[9] :0, I've tried with setting it as 1, but problem exists.
After flashing uboot and spl, while booting after…
Hello,
The GC6016 is not yet a released product. When it is released, the released datasheet will be available on the GC6016 portion of the TI webpage.
A preliminary datasheet is attached (this is not the final version, final specifications are…
Dear Team
As I know CRMT revision have being changed to 5.11. We use lot of TI IC product in our product . And our customer request us to provide the TI CMRT revision 5.11 form(file attached) Could you help me to reply the questions in the form?? (or…
Memory_AT45DB161D.pdf Thank you for your reply. As matter of fact we don't have any schematics at this moment. We use a off-shelf Integrated Biometics fingerprint sensor. We need to read the flash memory on the sensor. The SPI connection is via spi1 signals…
Part Number: DRA71XEVM hi
I'm using a custom platform based on j6entry evm.
Using 8-bit NAND (MT29F1G08ABAEAH4-AITG) with Page size 2048 and Spare size 64, nand boot is successfull.
But, using Using 8-bit NAND (MT29F2G08ABAGAH4) with Page size 2048…
The bq27530 TRM is still under development. The bq27531 TRM is almost complete and I have attached a draft of that. There are some differences, mainly in the charger section, but the rest of the document should apply.
As for the EVM kit, the interface…
