Part Number: UCD7242 Other Parts Discussed in Thread: LP-MSPM0G3507 , MSPM0G3507 Tool/software: Hi TI
I also posted on the LP-MSPM0G3507 board to ask，
Can the LP-MSPM0G3507 be used with the FUSION_DIGITAL_POWER_DESIGNER software to communicate…
Part Number: MSPM0G3507 Tool/software:
Hi TI
May I ask if the TI LP-MSPM0G3507 can be used with the FUSION_DIGITAL_POWER_DESIGNER software to communicate with the MSPM0G3507 via PMBus?
What hardware device is needed on the computer side…
Part Number: FUSION_DIGITAL_POWER_DESIGNER Tool/software: Good day,
Can you please confirm the latest version of Fusion Digital Power Designer GUI 7.0 for the UCD90xxx Sequencer (SLVUB51)? We are using the May 2017 issue and it references v7.0.11…
Part Number: FUSION_DIGITAL_POWER_DESIGNER Tool/software: Hello,
Is there a download available for Fusion Digital Power Designer version 7.9.1? It seems like the only version available on the website at the moment is 7.10.1.
Any help is appreciated…
Part Number: FUSION_DIGITAL_POWER_DESIGNER Version 7.10.1 does not support more than one USB interface adapter connected to the PC at the same time. Previous revisions of this software were able to scan all interface adapters and determine which one was…
Part Number: TPS546E25 Tool/software: Dear Sir：
We are a third-party programmer manufacturer and are currently developing TPS546E25 programming software. We want to use FUSION_DIGITAL_POWER_DESIGNER 7.10.1 to verify, but it is not supported. Can you…
Part Number: TPS546E25EVM-1PH Other Parts Discussed in Thread: TPS546E25 Tool/software: Hi team,
I am testing TPS546E25EVM-1PH, but found out that FUSION_DIGITAL_POWER_DESIGNER 7.10.1 version on the website does not support TPS546E25.
Where can I…
Part Number: TPS53689 Tool/software: Hello,
We are encountering the attached error in and would appreciate your guidance on a solution.
Steps to reproduce the issue:
Launch the Designer Tool.
Select "Create new Offline system from start".
…
Part Number: FUSION_DIGITAL_POWER_DESIGNER This is my first time working with the Fusion Digital Power Designer. Had a few basic questions.
1) In this example design i am working on, I am trying to have Rail #2 (0.85V) turn on only after a power good…
Part Number: FUSION_DIGITAL_POWER_DESIGNER Hi
I have ZC706 Xilinx evaluation board with TI UCD90120A controller and I would like to install FUSION_DIGITAL_POWER_DESIGNER software to reconfigure the TI UCD90120A controller
The TI link that I have for…
