Part Number: INA205 During initialization, when the INA205 cmp1 reset pin is pulled high and cmp1 in has no input, cmp1 out outputs a high level Can you see what the reason is, please
Part Number: INA205 Other Parts Discussed in Thread: INA204 , Hi,
My customer wants to use INA205AID for their new design.
I would like to know if INA205AID is getting to NRND or EOL.
The customer is using INA204AID already. Also I would like to…
Other Parts Discussed in Thread: INA203 , INA205 , INA282 hi,
my customer would like to use the INA203 and measure the current with a CMR from 0V to 60V.
Current variation between 40ma TO 1.1A
he choose 0.1R sense and figure out that the Figure…
Hello Priya,
1 - I am not sure what your query is here. If the ALERT is asserted and BSS138 MOSFET is turned on, I suspect that alot of current will pass through its relatively small RDSon if you removed the 10kohm resistor that should be in series…
Hello Jonathan,
Thanks for reaching out on the forum. We have several devices with Q1 versions that can detect that current level and have some sort of comparator for an alert. These devices include the INA381, INA300, INA301, INA302, INA303, and INA200…
Ifty,
For a common mode of 48V, you'll find our 60V-80V common mode capable products good. Since you need 0 to 5V or 10V output, you'll need a gain of 100 or 200 with a 50mV max input. Since you need to measure down to 10mV, you won't want to use our…
I tried one unit in the lab just now and found that with 5V supply and nothing on the inputs, I measured roughly 1.6V on VIN+ and VIN-. I swept the Vs around from 3 to 7 and saw the voltage on the inputs change from roughly 1.5V to 1.7V. Also, there was…
Yoshihiro-san,
Unfortunately we are unable to provide data like that to a customer without an NDA. I can confirm that the data sheet parameters are an accurate representation of the data. The offset voltage is better than ±3mV over 25°C to 125°C, and…
