Part Number: LMH5401EVM Hi
I have just received a few LMH5401EVM and I have to make it work in single voltage mode.
The user manual says that V- and gnd should be connected, but is it enough to just place a short at the footprint of RB- or C16?…
Part Number: LMH5401EVM Hi, When using a single 5V power supply, are C11 and C12 on the bottom layer of the EVM unnecessary? C10, C13, and C14 are located near the connector, so I think they are options as required in the actual design. On the other hand…
Part Number: LMH5401EVM Other Parts Discussed in Thread: LMH5401 Hi there,
I was trying to test the LMH5401EVM output with the square wave input.
As shown in the figure below, the green and purple channels are the differential inputs (positive and…
Part Number: LMH5401EVM-CVAL Hi
Please provide the CE/EU Declaration of Conformity for this product. The CE/EU Declaration of Conformity is not available on the T.I website.
Thank you
Part Number: LMH5401EVM Other Parts Discussed in Thread: LMH5401 , , TIDA-00826 Hello,
We're working on utilizing the LMH5401 as a wideband single-ended to differential converter for interfacing the output of a photodiode (Thorlabs DET08CFC) to an ADC…
Part Number: LMH5401EVM Hi team,
I have the LMH5401EVM and I am in the process of evaluating this board. I connected it and powered using the single supply and manually grounded the PD pin. Still, I am unable to see the amplified signal. It seems that…
Part Number: LMH5401EVM Other Parts Discussed in Thread: LMH5401 , ASH , , THS4551 The data sheet says this EVM has an upper frequency limit of 5 GHz. The amp itself has an upper frequency range of 6 GHz. What makes the EVM good to a lower frequency limit…
Part Number: LMH5401EVM Other Parts Discussed in Thread: LMH5401 , OPA855 Hello,
We are planning to use LMH5401 to convert SE to DE in our optical front end. We are using OPA855 as TIA. Can we get the altium project for the evaluation modules of both…
