Search tips
Showing 75 results View by: Thread Post Sort by

  • LMH6321: Output voltage sag regardless of CL current limit pin configuration

    Part Number: LMH6321 Tool/software: What I am trying to do is generate multiple supply rails, a DAC sets the required voltages and the LMH6321's are intended to buffer these voltages and so the load can sink/source up to 200mA. For example one of…

  • LMH6321: Current Buffer Amplifier Design

    Part Number: LMH6321 Hi Team, I tested the LMH6321MR/NOPB by using +/- 12VDC Power Supply for powering the IC and EF(error flag) pin and Current Limit pins are left open while testing. without any input is given to the Buffer IC, the buffer IC getting…
    • Answered

  • LMH6321: Best Circuit to use LMH6321 to high parastic capacitive (500p) load and high frequency (20Mhz)

    Resolved
    Part Number: LMH6321 Other Parts Discussed in Thread: TINA-TI Hi Team, Good day. I have a high-speed signal coming to a PCB and I wasn't able to use the high-speed signal (about 20Mhz) directly to the digital input-output card, because of high parsatics…
    • Resolved

  • LMH6321: Request for Data: Large-Signal Slew Rate and GBW Performance

    TI Thinks Resolved
    Part Number: LMH6321 Does TI have any information available regarding the thread title? Or, is there any other data available other than what's been listed on the data sheet?

  • LMH6321: Request for Data re: Large-Signal GBW and Slew Rate Performance

    TI Thinks Resolved
    Part Number: LMH6321 Does TI have any information available regarding the thread title? Or, is there any other data available other than what's been listed on the data sheet?

  • LMH6321: LMH6321 DC SHIFT AT THE OUTPUT

    Part Number: LMH6321 Other Parts Discussed in Thread: TINA-TI Hello Expert, We are using LMH6321 with a single supply operation. Positive supply V+ for LMH6321 is +15V and Ground pin is at V+/2. With this configuration, there is a 1V of DC shift in…
    • Answered

  • LMH6321: How the output depends on the frequency (Sallen Key)?

    Resolved
    Part Number: LMH6321 Other Parts Discussed in Thread: TINA-TI Hi Experts, Seeking your assistance on this query: Customer uses the TI filter design tool; there it selected the LMH6321. Where in the datasheet we can see which maximum output voltage…
    • Resolved
    • Answered

  • LMH6321: LMH6321:How to use Vcl pin for simple current limit ?

    Resolved
    Part Number: LMH6321 Other Parts Discussed in Thread: TL431 , BUF634 Hi, I'm planing to use LMH6321 and would like to use utilizing Vcl pin with setup of 200mA current limit. But unfortunately I'm not sure how to use Vcl current limit correctly, In…
    • Resolved

  • LMH6321: LMH6321 is consuming more current when tab pin is connected to V- Supply.

    TI Thinks Resolved
    Part Number: LMH6321 Hi, When we connect LMH6321 tab pin to negative rail supply(-15v).it was taking 140mA,and temperature was rising up to 40*C, when tab pin is left unconnected it was taking 30mA only . Can you please clarify the above issue . …

  • LMH6321: Disable output current using CL pin.

    TI Thinks Resolved
    Part Number: LMH6321 Will connecting the CL pin to GND effectively disable the output current? I would like to use this scheme as a temporary output disable during power-up.

Didn't find what you are looking for? Post a new question.