Part Number: LMV225 Hello,
We are implementing your LMV255SD chip (WSON package) to measure a UHF signal level @ 900MHz (RFID application).
We use two RF detectors along our transmission chain with appropriated attenuation (15 and 35 dB ensuring the…
Part Number: LMV225 Other Parts Discussed in Thread: LMV226 , LMV228 We're using the LMV225 (WSON) to measure L-Band RF power. We're seeing a lot of variation, chip to chip in the output voltage.
We use a WB-SG1 signal generator to create a carrier…
Part Number: LMV225 Other Parts Discussed in Thread: LMH2110 , LMH2121 Hi Team,
My customer using LMV225 Power Detector in their previous reference and customers designs.
Unfortunately it is specified for frequencies up to 2GHz only that is not sufficient…
Part Number: LMV225
HI Sir,
may we know the value of θJA?
if Tj is 150 deg, TA 25 deg, power support is 3.3v and IDD is 8mA , so PD is 0.0264 watt?
is the calculation like this?
example:
150= (θJA * pd) + 25, θJA is?
Part Number: LMV225 Other Parts Discussed in Thread: LM3262 , Hi,
Could you please tell me whether there are any concerns when the rubber magnet comes close to LMV225URX/NOPB during the mounting process. The similar post is as below.
LM3262 Effect…
Part Number: LMV225 Hi,
The LMV225 SD WSON package has a power pad, not connected on the EVM.
-Is this pad recommended to be floating or grounded?
Thanks for advising.
/M.A.M
