Part Number: MSPM0G1519 Hello,
I am following up on https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1622209/mspm0g1519-bsl-entry-from-app which was inactive and hence locked…
Part Number: MSPM0G1519 Hello,
we have a system of 2 MCUs. On is a TI MSPM0G1519 (MCU1) where we implement FWU via standard TI BSL.
To get MCU1 into BSL the other MCU is controlling the NRST and BSL_invoke pins to reset MCU1 and then enter BSL.
…
Part Number: MSPM0G1519 Hi,
My customer is looking for a way to modify the READOUTEN[31:16] bits on BSLCONFIG0 register in NONMAIN from FFFFh to AABBh after Firmware has been programmed.
Is it possible ? Specifically, is there any method to achieve…
Part Number: MSPM0G1519 Hello,
What's the minimum active time that is required for the wake signal to be asserted before the level is latched in IOMUX to wake the MCU?
IE if I have a GPIO PA0 configured for wake, active low, how long does the line…
Part Number: MSPM0G1519 Hello MSP team,
is it true that the workaround required for MSPM0G150x to get the BSL working is also required for the higher memory devices MSPM0G151x?
The paragraph for "BSL_ERR_01" is not listed in the current errata sheet…
Part Number: MSPM0G1519 Other Parts Discussed in Thread: LP-MSPM0G3519 , MSPM0G3519 Hi Team,
Posting on behalf of our customer.
I'll share this E2E post with our customer so they can reply when needed.
I'd like to invoke the BSL of my MSPM0G1519…
Part Number: MSPM0G1519 Tool/software: Hello,
I have a customer migrating code from an STM32 MCU and one of the things they have in their systick ISR is a _WFI() so that they can pause the execution state within the isr and do something on the next…
Part Number: MSPM0G1518 Other Parts Discussed in Thread: MSPM0G1519 Hi,
The MSPM0G1519 datasheet describes "Up to 32 application-chosen sectors from the main flash bank(s) or data bank can be used as high endurance sectors. This enables applications…
Part Number: MSPM0G1519 Tool/software: Hi Champ,
My customer refers to our AN, slau887- MSPM0 Bootloader, to develop their boot code. And need CRC. It shows we need follow CRC32-ISO3309 polynomial and Final XOR value should be 0x0 shown as below.
…
