Hi Ryan,
How did you "load" the model when you say "PSpice can't load them all"?
To use the file OPA838.LIB, you need to do 2 things:
Create a libary (an OLB file) so that you can place a symbol in your schematic. This is done by the cadence model…
There has not been a response on this thread for a while. If you have additional input or questions, please let us know. Otherwise, the thread will be closed in a couple of days.
Thanks
Chuck
I had meant to also mention there is a background project to update these models to what is call the GWL template - again a macromodel but much more methodical on these kinds of issues - perhaps that is nearing completion for the OPA838 model and it will…
Part Number: OPA838 Other Parts Discussed in Thread: OPA354 What is the maximum dual supply rating for the part? It appears to be 5.5v/2=2.75v so the part cannot be operated with anything greater than +2.75v to -2.75v. Is this true? I was hoping to operate…
Part Number: OPA838 Other Parts Discussed in Thread: OPA615 , TINA-TI Hi - I have a signal that varies between 2MHz and 30MHz and can also vary in amplitude between 100mV peak to peak and 1000mV peak to peak. I'm attempting to count pulses using a counter…
Hi Pengkun,
input bias current of OPA838 is typically 1.5µA.This will cause a voltage drop of 4.5mV across R31 (3k). This voltage drop is amplified by the noise gain of your circuit ((R32+R33)/R32=8) and appears as 36mV offset voltage at output of…
Part Number: OPA356-Q1 Other Parts Discussed in Thread: LMH6601-Q1 , OPA859-Q1 , OPA358 , OPA817 , OPA607 , OPA810 , OPA838 , OPA818 Hi exoerts,
Customer need smaller size chip to replace OPA356Q1. Except package size, other spec can respect to OPA356Q1…
Part Number: LMH6624 Other Parts Discussed in Thread: OPA838 Tool/software: Hi Support;
I tried to measure output impedance at 10Mhz of LMH6624 by connecting 1k load resistor and 1v Ac source to the output of op amp on Ti pspice. I measured and calculated…
Part Number: OPA855 Other Parts Discussed in Thread: OPA858 , OPA838 Tool/software: Hi,
I am trying to design AC-coupled TIA for two germanium-on-silicon waveguide photodiodes (Cd = 10-50 pF, Rs=1-10 MOhm) in a balanced configuration.
I need a TIA…
Part Number: OPA838DBVEVM Other Parts Discussed in Thread: OPA838 , Dear all,
I want to use a reference design form Texas instrument as a reference for my layout for OPA838, I noticed this reference design is a 4-layer board:
As we can see in the…
