Part Number: INA350 Other Parts Discussed in Thread: TINA-TI Tool/software: From SBEM PVT LTD
Request for IBIS Model
Required IBIS Model
For EMC analysis.
As an amplifier with Gain of 10.
Part Number: BQ25896
Tool/software:
https://web.archive.org/web/20240224101831/https://e2e.ti.com/blogs_/archives/b/fullycharged/posts/understanding-battery-charger-features-and-charging-topologies
Here is a wonderful blog containing battery charging…
Part Number: OPA2365 Tool/software: Hi,
I have a question regarding the SLAU508 "TI Precision Designs" document from John Caldwell. The title of his document is "Analog Pulse Width Modulation". I do not understand the Error Amplifier…
Part Number: TPS62916 Other Parts Discussed in Thread: ADS127L11 , TPS7A20 , , LMQ61460 , LMR51606 , LMR36500 , LMR36503 , LMR54406 , LMR33620 Tool/software: For a new project I am working on a PCB where I have to convert an analog current loop signal (related…
Hi Rekha,
What is your test signal? Are you testing with sinewave at all?
THD+N is measured by playing a given single-frequency tone, applying a notch filter on that specific frequency, and measuring the rest of the band after removing the test tone,…
16.72 V through 10/97.6 implies 1.7131 V at the ADC pin 16.56 V through 10/97.6 implies 1.6967 V at the ADC pin So measure at the ADC pin. Is it closer to 1.6967 V or 1.7131 V? If the ADC pin is at the wrong voltage, you probably have an input impedance…
HI Chris,
There are a number of circuit choices depending on your bandwidth requirements, voltage supplies, ADC settings and reference voltage.
If you plan to power the op-amp with a unipolar +5V supply, you could consider the OPA392.
The OPA392 is a…
Hi Mike,
We do not have a device with these exact specs. However, the AMC1351 is one of our voltage sensing devices that has an input voltage range of 0-5V.. but the output would be differential. You can add an additional amplifier stage to convert the…