Search tips
Showing 51 results View by: Thread Post Sort by

  • TLV3401: TLV3401IDBVR COD place

    Part Number: TLV3401 Pls show us the TLV3401IDBVR COD place, our customer need it, thanks a lot!
    • Answered

  • TLV3401: TLV3401IDBVR

    Resolved
    Part Number: TLV3401 Tool/software: Hello, I’m searching for informations on the different suffixes use by TI. At the moment we are using the component TLV3401IDBVTG4, which is obsolete. We intend to use instead the component TLV3401IDBVR, but our…
    • Resolved

  • TLV3401: Pull up resistor on the output pin affecting the VOL

    TI Thinks Resolved
    Part Number: TLV3401 Tool/software: Hello, I am using TLV3401 in the below configuration , But , the VOL observed is 3.2V which is not expected. Could you please help me understand the issue here. My expectation is to have VOL<0.5V.

  • TLV3401: Comparator Behavior When RL is Shorted

    Answer Suggested
    Part Number: TLV3401 Tool/software: I’m currently working with the TLV3401 comparator, and I came across an interesting scenario that I’d like to discuss. In my circuit (attached image), the output stage includes a (RL) marked in yellow. My question…
    • Answered

  • TLV3401: Non-Inverter Comparator with Hysteresis doesn't behave as expected (TINA Simulation)

    Resolved
    Part Number: TLV3401 Hello, I would like to design a Non-Inverter Comparator with TLV3401 according to the following parameters: Vlow = 7,84V, Vhigh = 8,94V, Vcc = Vref = Vpu = 10V. Vo = "High" when Vin>Vhigh Vo = "Low" when Vin<Vlow I…
    • Resolved
    • Answered

  • TLV3401: Can't follow design from SNOA997A for an Inverter Comparator with Hysteresis

    Resolved
    Part Number: TLV3401 Other Parts Discussed in Thread: TINA-TI Hello, I can't get the numbers according to the SNOA997 document that shows an example about how to design an inverter comparator with hysteresis. I'm trying to get the numbers of the example…
    • Resolved

  • TLV3401: Differential input resistance

    TI Thinks Resolved
    Part Number: TLV3401 Other Parts Discussed in Thread: INA149-EP Hi, We have a customer with below concern. I tried to measure all parameters of the tlv3401 device as per datasheet, I was able to measure most of the parameters but differential input…
    • Answered

  • RE: TLV3401: Low battery cutoff for discharge management

    Resolved
    Hi, To implement external hysteresis, you do not need a built-in internal reference. I will attach an excel tool to help you calculate the resistor values that you need for external hysteresis in your design. From what I can tell the 5V source will…
    • Answered

  • TLV3401: Pull up resistor

    Resolved
    Part Number: TLV3401 Other Parts Discussed in Thread: TLV7031 , , TLV7041 Hi Team, The recommended pull up resistor is 1MΩ, we want the circuit to have higher output current, so the pull up resistor is changed to 10kΩ, but the simulated result shows…
    • Resolved
    • Answered

  • TLV3401: Effect of an input exceeding "VCC + 5"

    Resolved
    Part Number: TLV3401 Other Parts Discussed in Thread: TLV3402 I have a question about exceeding, in a particular way, the absolute maximum rating of the input of the TLV3401. Below is a simplified schematic diagram of a circuit that we made a while…
    • Resolved

Didn't find what you are looking for? Post a new question.