Hello Miyazaki
Thank you for the inputs.
The reason i asked about the low power modes was to check if the configuration would match the below sequence where RTC_PWRONRSTn is not used.
Looks like the customer configuration does not match the requirement…
5126.tmdxice3359_sch_3h0013_v2_1a.pdf
Hello Cindy Lim,
Thank you for the note.
Not sure if this is an issue on your side.
We do not have issued attaching pdf schematics.
Regards,
Sreenivasa
Hello Ashish,
Please find the document, providing information on LP board.
Here it is specified that, ADC channels mentioned needs the MUX setting to get it enabled, in LP Board.
We shall confirm, same once again with our internal team again…
Part Number: LP-AM263 Other Parts Discussed in Thread: TPS22965 , LP-AM243
we are interfacing AM263 Launchpad with our Board.
whether it is possible to power ON the Launchpad with External Power Supply through BoosterPack Pin's (+5V >>J3.21 and J7…
Hi Patton, Here is the BootLog. Enclosed the Schematics. 6177.Optilink1_sch.pdf
=> printenv fdtfile fdtfile=ti/k3-am625-sk.dtb
Fullscreen
cust_post_0324.txt
Download
BootLog:
Starting kernel ...
[ 0.000000] Booting Linux…
Hi Anil,
The oldest version of the schematic I've been able to find is 1.0B, I believe that should be closer to what you need.
For the old version of the SDK, I will re-assign this thread to our software team to see if they can provide it.
Thank…
Part Number: AM5728 I have a custom am5728 board I am trying to validate the a PCIe M.2 connector with a Western Digital SN520 M.2 NVMe SSD, but request help because the SSD is not being detected. * I am using a Linux RT build from the TI SDK 6.03.00…
Alex,
I would follow whatever the TRM says about the register definitions for question 1. I am trying to verify why the include files do not match the TRM definitions and once I find out, the mismatch will be corrected.
I have asked a colleague about…
