Hi,
The output low voltage spec for reset and PG pins is characterized and tested with the maximum recommended sink current, which is 700 uA for the TPS726. I suggest using the reset output to drive an external transistor that can sink enough current…
Part Number: TPS7B82-Q1 Other Parts Discussed in Thread: TPS7B88-Q1 , TPS7A47-Q1 , TPS746-Q1 , TPS785-Q1 , TLV767-Q1 Hi, TI Support Team
I have recommended the following parts to the customer as a substitute for other SUPPLIER.
- TPS7B82-Q1
-…
Hi Daisuke,
It looks like our current hardware design guide and EVM schematics have no recommendations for additional filtering of the VDDS_OSC power. So the only limits we have are the datasheet limits (excerpting below).
However, looking at the…
Hi Adrian,
Please consider our new TPS745 which is rated for up to 500mA, or its sister device TPS746 which is rated up to 1A.
If fixed devices are needed please consider our TLV755P and TLV757P family.
Regards,
Wilson
Part Number: TUSB4020BI Tool/software: Hello.
I'm trying to supply 1.1V using TPS74611 to the 1.1V rail of TUSB4020BI.
The data sheet of TUSB4020BI says that ferrite beads are recommended to remove noise, but I would like to ask if there will be no…
Hi Patrick,
Thank you for providing the information regarding your application. Here are a couple devices that may fit your system:
TPS7A91 - released
TLV757P - released
TPS746 - samples available online, release at end of year
TLV759P - samples…
Hi Jason,
Unless the business case is large enough, we will be unable to perform ESD testing on older devices such as this. (But if you think the business case is large enough, please let us know so we can discuss it with leadership). All of our modern…
Part Number: TPS745-Q1 Other Parts Discussed in Thread: TPS746-Q1 Hi Team,
There is a good new that we could DIN TI product!
Customer is looking for the replacement of TPS74518PCQWDRVRQ1
Please help suggest a newer IC, THX
Hi,
If I am correctly understanding your question, you need an LDO that is p2p with the TPS7A11 except for pin 2, which is NC on the TPS7A11 and should be PG on the new LDO. Unfortunately, TI does not have such a device. The TPS745, TPS746, and LP5912…
