The current version of the Silicon Errata (TI document # SPRZ278) Advisory 3.1.1.193 states there is no workaround, but TI has a new ULPI USB PHY (TUSB1210) that does not have this interoperability issue. You will need to contact your local TI sales representative…
Brandon,
Nope. I haven't been successful in modding in the TUSB1210 . I did get a USB3317 modded in and it does the same thing as the USB3343, which is not work.
Greg
Hi Ajay,
Our AM3517/05 running at 3.3V VDDIO so TUSB1210 with 1.8V only ULPI interface does not suit well.
Do you have any alternative PHY that you can recommend?
Thanks,
HN
Hi Roland,
This problem seems like hardware issue. The problem should be due to only one component failure or if it is a passive component its parameters may be changed. I recommend you to test all components on the board which are related to the USB…
Other Parts Discussed in Thread: DM3725 , TUSB1210
Hi all,
In our case, when we did the Signal Quality Test more than once on a same board, the result is sometimes all the Signal Quality Test items passed, and sometimes signal rate failed .
USB…
Other Parts Discussed in Thread: TUSB7320 , TUSB1210 Hi,
I am working on a project in which I have to drive to one of CCD camera named ATIK314L+ which is supported with Cypress FX2 USB drivers. Also, It provided with High speed USB interface.
…
I am not aware of any plans to fix this issue in the AM3517.
The TUSB1210 does not have this problem when used with the AM3517. I am not aware of any other options.
Regards,
Paul
Other Parts Discussed in Thread: TUSB1210 , WL1271 Hi,
I am trying to integrate the Wilink MODULE with the Zedboard. I followed the scripts available at microzed product webpage and carefully changed in this so that it can use it on Zedboard. But finally…
Other Parts Discussed in Thread: TUSB1210 For what is the pin hsusb1_clk? How connect it with USB3317 CLKOUT or REFCLK? I cannot find any USB PHY for 60Mhz clock frequency.
