Other Parts Discussed in Thread: TUSB3410 Hi experts,
OK...number one I am sick and tired of the USB-serial Bridges.In the device-manager they show up in the Ports ( COM & LPT ) section.....this stinks (for my clients). The reason ...is.....because…
Hello Eduardo,
Sorry for the delayed response. From the scope captures you posted, it appears that you are not following the reset timing requirements for the TUSB3210 (section 4.2 of the datasheet), on the failing case it can be seen that the clock…
Hi Peter,
Could you elaborate more on your solution's requirements and how exactly are you planning to use the TUSB3210? This way I could help you figure out if the TUSB3210 is the better solution for you or recommend another one.
Also, Could you…
Other Parts Discussed in Thread: TAS3308
Dear TI-Team,
I accidently used the TI AppLoader Driver for the TUSB3210 on the TAS3308LC-EVM. By installing this Driver in Windows, the firmware of the eeprom of the TUSB3210 got erased and flashed with…
Hello,
My customer use TUSB3210 for industrial application.
In the applicaion, There are very short some suspend of power; < 100ms, and then TUSB3210 can not enter enumulation and go to freeze..
( I guess TUSB3210 is not be properly reseted …
ELIAS san
Thank you for your reply.
I am confused, because customer had already designed the Mass production as same as data sheet.
When we use self powerd, If #21pin of TUSB3210 were GND ( as same as DataSheet), what is the problem ?
I could…
Other Parts Discussed in Thread: MSP430USBDEVPACK Hello,
I've been trying to decide which of the above chips would work for me in a simple project that sends HID events (hopefully MIDI) via USB of 8-to-16 buttons (a kind of a MIDI controller).
I…
Hi,
I'm working with a little circuit to test the TUSB3210. The circuit have some leds, a 12 Mhz. crystal as clock source, a usb connector and a RS232 level adapter.
In the first test's I blink the leds, test the timmers, and all work fine. But when…
Other Parts Discussed in Thread: OMAP3530 Hi,
I have an 8bit cmos camera module, which I need to convert to USB2.0 device interface.
Can I use TUSB3210 for my mentioned application ?
Is there any schematics available for similar kind of design…
