Part Number: XTR105 Other Parts Discussed in Thread: XTR108 , XTR112 , Tool/software: I am trying to find the best replacement for XTR103. What do you suggest, that has internal lineariza- tion circuitry for direct interface to RTD?
Part Number: XTR105 Tool/software: We have purchased XTR105U(IC) last year.
Then received an inquiry from our customer regarding the country/ supplier from which the "Yttrium" component was sourced.
We would appreciate it if you could check and provide…
Part Number: XTR105 Tool/software: Dear Specialists,
My customer is evaluating XTR105 and has a question.
I would be grateful if you could advise.
---
Using the circuit diagram in Figure 6-3 on page 13 of the XTR105 datasheet, I confirmed the…
Part Number: XTR105 Hi
what is the difference between XTR105U and XTR105U A (the additional A )
is it just a logistic difference ?
I couldn't understand it from the datasheet
thanks
Raz
Part Number: XTR105 Hello,
We had used XTR105U current transmitter IC in one of our previous designs. Currently its status is 'Last time buy'. So we were looking for its substitute. We found one part in the same series XTR105UA/2K5 as per the website…
Part Number: XTR105 Other Parts Discussed in Thread: INA826EVM , TMUX6219 Hello,
We are using XTR105UA in one of our design. I have attached the image of the circuit in our design. Can you please verify if the design is functionally correct or not?…
Part Number: XTR106 Other Parts Discussed in Thread: XTR105 Dear Team,
what are the differences between XTR106UA vs. XTR105UA?
Can XTR105UA be used as an alternative to XTR106UA? Is there something not obvious that one needs to pay attention to? …
Part Number: XTR105 Other Parts Discussed in Thread: XTR101 Hi,
Is there any test result data available for XTR105 MTBF.Can you share with me if anything available.
Earlier we used XTR101 for RTD to 4-20mA loop current generator and we switched to…
Part Number: XTR105 Jul 172023 ordered XTR105PA 100 tablets from Mouser, order number: 29530005 inspection found that most of the foot root has a crack (see figure) . Is this situation caused by the production process or the device itself
Thank you very much for the support, Luis.
The problem and the ways of solving it are clearer for me now!
The only remaning question that I have for now is: Do yoy think a HCNR201 would do the trick as a functional analog isolator?
pdf1…