Part Number: SN74LVC1G32-Q1 Good morning,
I see from the datasheet that the device accepts voltages to 5.5V and supports down translation to Vcc.
I wish to drive one of the inputs with 3.3V and the other with 5.0V, Vcc is 3.3V
My question is:
…
Ghafoor,
You can purchase a TSW14J10EVM, which is an adapter board used to interface our JESD EVM's with older Xilinx platforms. If you install resistors R146, R148, R142, and R144 and remove R143 and R145, this adapter board will connect the DAC_SYNC…
Part Number: AM3352
Hello,
We’re using the AM3352BZCZ30 on a custom board and I have few questions regarding temperatures.
I’m a bit confused about the difference between junction temperature, operating temperature, and surface temperature of…
1. UA78M00 series LDOs only have 53 °C/W junction-to-ambient thermal resistance based on SOT-223 pakage, which seems much better than the other competitors, it's very good. But I wonder, this value is based on the devices working on board in still air…
Part Number: AFE7950EVM Other Parts Discussed in Thread: AFE7950 Hi Team,
I am using AFE7950 Development board with Microsemi FPGA development board(MPF300). final aim is configure the AFE chip without Latte software.
step-1: I configured AFE with…
Other Parts Discussed in Thread: ADC34J42 Hi all,
I would like to design in a data converter from the ADC34J4x family to replace a design with a competitor's JESD204B ADC and was wondering if someone could help resolve two issues that came up.
Looking…
Part Number: LM5190 Tool/software: Hi, TI expert
A customer is looking for a Buck converter with Constant-Current Constant-Voltage (CC-CV) function, like the attached LTM8064(ADI) part.
LTM8064(ADI).pdf
- Input voltage: 5~20VDC
- Output current…
