Search tips
Showing 10,080 results View by: Thread Post Sort by
    Answered

  • RE: J722SXH01EVM: Raspberry PI camera v2 (imx219) not detected

    Resolved
    Thanks Fabiana, something I've realized just yesterday is in fact the 15-pin to 22-pin ribbon cable that I have been trying on J722S EVM actually happen to be " RPI 5 DISPLAY CABLE " rather than " RPI 5 CAMERA CABLE " to my surprise. let me retry with…

  • TLV320AIC36 - Access to miniDSP processed data and interface to Raspberry Pi

    Hi All, Could someone help with two questions? 1) The TLV320AIC36 can sample audio at 32 bits / 48 KHz then pass internally to its miniDSP then pass the output of the miniDSP to a host processor such as the Raspberry Pi (and reverse for audio output…

  • LAUNCHXL-CC3235S: Trying to source the right parts mix for a creating a CC3235S based wireless sensor hub that pushes data to the cloud.

    TI Thinks Resolved
    Part Number: LAUNCHXL-CC3235S Other Parts Discussed in Thread: CC3235S , HDC2010EVM , OPT3001EVM , LMP91200 , ADS1120 We are in the process of prototyping a yard sensor that reads temperature, humidity, lux and pH and then relays the sensor data to the…

  • DS90UH941AS-Q1EVM: Assistance Required: DS90UH941AS + DS90UH948 with Raspberry Pi CM4 (Debian Bookworm)

    TI Thinks Resolved
    Part Number: DS90UH941AS-Q1EVM Other Parts Discussed in Thread: DS90UB941AS-Q1EVM , DS90UB926QSEVB , ALP Tool/software: Dear TI Support Team, I am working with the DS90UH941AS-Q1EVM serializer and DS90UH948 deserializer to drive an 800x480 RGB display…

  • Linux/cc1310: Question on Sub-1 GHz Sensor to Cloud Industrial IoT Gateway Reference Design

    Part Number: CC1310 Other Parts Discussed in Thread: CC1350 Tool/software: Linux Hi! Referring to the IoT gateway reference design based on Beaglebone Black and CC1350 launchpads I have installed the SW on the Linux side and the 2 different FWs on the…
    • Answered

  • RE: SK-AM62B-P1: Booting the EVM board via Raspberry Pi OS

    Resolved
    Nick Saulnier said: Are you loading code from Linux SDK onto your board? Yes, i am trying to load the boot loaders from AM62x Linux SDK 9.2.1. onto am62x EVM by using the dfu flash script. Nick Saulnier said: Are you taking a different operating system…
    • Answered

  • SK-AM62: Failed to configure csi-2 DPHY on OVM9284 image sensor configuration with linux sdk

    Resolved
    Part Number: SK-AM62 Other Parts Discussed in Thread: AM625 Hi Champs. We use the ti-processor-sdk-linux-am62xx-evm-08.04.01.03 for connecting the OVM9284 image sensor to SK-AM62. What files need updates to configure monochrome RAW8/RAW10 format?…
    • Resolved

  • RE: IWRL6432BOOST: mmWave - Help: Basic setup, tuning, and using with Raspberry Pi?

    Hello Fred. Fred Miller said: And If I'm right on the CMD line I'd call the SDK - does TI have any examples of how this would be done? I'm not aware that there is command line support to use the SDK, but let me double check to confirm this. You can…
    • Answered

  • PCM4201EVM: PCM4201EVM Interfacing With Raspberry Pi 4 or 5 and other silly question

    Resolved
    Part Number: PCM4201EVM Other Parts Discussed in Thread: DRV134 , PCM4201 , OPA2134 Tool/software: Hello I am a mechatronics student from UBC. I am making my own data acquisition card to collect welding audio data. I have the instrumentation designed…
    • Resolved
    • Answered

  • LAUNCHXL-CC1310: Sensor To Cloud (local testing)

    Resolved
    Part Number: LAUNCHXL-CC1310 Other Parts Discussed in Thread: CC1310 Good day to all, I am doing a project with CC1310, the measured data would be uploaded to cloud via Rasp. I wonder can we connect 2 collector in 1 Rasp without conflicting data from…
    • Resolved

Didn't find what you are looking for? Post a new question.