INA196: High Temperature Option

Marco Rojas

Part Number: INA196
Other Parts Discussed in Thread: INA271-HT

Hey team,

I'm looking for a high temperature replacement for INA196, one that can work at 175C.

I'm aware of the INA271-HT, would this be a good replacement or are there more High Temperature options that I'm unaware of? I'm having a hard time finding a catalog of some sort outside of the high-temp filter in the Aero apps page.

Thanks in advance for further assistance

Marco

over 3 years ago

+1 Guang Zhou over 3 years ago

TI__Mastermind 30100 points

Hi Marco,

Looks like INA271-HT is the only option, and we don’t have other high temp current sense amplifiers that are specified at 175°C or higher.

Regards, Guang

0 Marco Rojas over 3 years ago in reply to Guang Zhou

TI__Intellectual 1830 points

Not sure if you could follow up on this but the INA127-HT is a current device being used but the package size is more than desired. Are you aware of any alternative parts with a smaller package with similar functionality?

0 Marco Rojas over 3 years ago in reply to Marco Rojas

TI__Intellectual 1830 points

Just to follow up, could you clarify the package sizes of the INA271-HT and the availability of each? I'm aware of the AHD, HKJ, and HKQ packages, and I'm fairly certain the KGD (bare die) isn't desired at the current moment.

0 Guang Zhou over 3 years ago in reply to Marco Rojas

TI__Mastermind 30100 points

Hi Marco,

It appears the only available packaged options are HKJ and HKQ. The mechanical datasheets are listed here and here.

Regards, Guang

Amplifiers

Amplifiers forum

INA196: High Temperature Option