TLV8811: The output of the non inverting amplifier does not come out.

I left out some parts because there was no space.
There was no change in the output even if I decorated it like the circuit below.

I removed 100ohm and 250pF.
Can I decorate the circuit diagram like this?

Hi Jihoon,

yes, of course, you are free to do whatever you want. But it's hard to believe that there is no space for a 0201 220pF cap. A 0201 package has a length of 0.6mm and a width of 0.3mm

https://www.mouser.com/c/passive-components/capacitors/ceramic-capacitors/mlccs-multilayer-ceramic-capacitors/multilayer-ceramic-capacitors-mlcc-smd-smt/?capacitance=220%20pF&case%20code%20-%20in=0201&dielectric=C0G%20%28NP0%29&instock=y

Kai