LMV7271: To drive 5V/0.25A load

Hi Archie,

what exactly do you need? An output buffer for the LMV7271? Please elaborate in detail.

Kai

Hi Archie,

Thank you for your post. As Kai is pointing out, are you wanting a comparator to source 250mA of current?

If this is the case, I think an output buffer would be the best way to do this with the LMV7271. 

I would like you to provide more design details as well. What are the input signal voltage levels, frequency, shape, etc. 

Is your supply voltage for the comparator also 5V? I would like you to confirm. 

Best Regards,

Joe

Applications Engineer

Linear Amplifiers Business Unit | Comparators Product Line (CMPS)

All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml)

Hello Kai/Joe,

I actually asked this already from client two days ago, requesting their design implementation but still not receiving inputs from them until now.

I assume the customer is using it as comparator.

Thank you for your guidance, will update this post as soon as I receive feedback from client.

Regards,
Archie A.

Hello Archie,

Thank you for providing your update. I will wait for the inputs from your client.

Best Regards,

Joe

Applications Engineer

Linear Amplifiers Business Unit | Comparators Product Line (CMPS)

All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml)

Archie

Thanks for your use of the forum.  Were you able to receive a response or do you require additional support?  We can keep this open if you need more time but wanted to reach out just in case this has been resolved.

Thanks, Chuck