This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH6702: Use in differential configuration

Part Number: LMH6702
Other Parts Discussed in Thread: THS3217

Hello, 

I would like to use the LMH6702 in a differential amplifier application (4 resistors of equal values). Can a current feedback amplifier such as the LMH6702 be used like that ? Will the frequency response, linearity or stability be compromised ? 

Thank you 

Louis

  • Well Louis, of course it can, just start with the recommended Rf value and go from there, If the source is differential need to think about input impedances. The inverting side has an active impedance element that requires and adjustment to the R values on the Non-inverting input for load matching

    We needed to do this exact job inside the THS3217 for the D2S stage, a very wideband CFA. Look on page 32 for a discussion of that issue. 

  • Thanks Michael, 

    Louis