OPA340: OPA340

Sagar Dudhal

Part Number: OPA340

i am using OPA340 dual opamp with one channel unused.

how i can terminate unused channel inverting and noninverting pins

+1 Marek Lis 7 months ago

Place the unused channel in a follower (G=1) configuration and drive the input to mid-supply so the input and output stay within op amp linear voltage range. For more, please read the following: https://e2e.ti.com/blogs_/archives/b/thesignal/posts/the-unused-op-amp-what-to-do

0 Sagar Dudhal 7 months ago in reply to Marek Lis

Thanks Marek,

Appreciated your response.

0 Marek Lis 7 months ago in reply to Sagar Dudhal

No problem. Good luck! .

Amplifiers forum