TAS2563: Amplifer

Priyanka Kanale

Part Number: TAS2563

Tool/software:

TAS2563 has MCLK signal but is it mandatory to connect MCLK signal or can we leave it unconnected as we are giving the BCLK, SCLK and SD from our Host which even has the capability to provide MCLK from itself

1 month ago

0 Ivan Salazar 1 month ago

TI__Guru** 109055 points

HI Priyanka,

You can leave MCLK pin floating. This pin is usually not connected as SBCLK is used as the main clock source for the internal clock tree.

Best regards,
-Ivan Salazar
Applications Engineer

0 Priyanka Kanale 1 month ago in reply to Ivan Salazar

Prodigy 20 points

Hello Ivan,

Is there any update?

0 Ivan Salazar 1 month ago in reply to Priyanka Kanale

TI__Guru** 109055 points

Hi Priyanka,

I replied to this above

Ivan Salazar said:
You can leave MCLK pin floating. This pin is usually not connected as SBCLK is used as the main clock source for the internal clock tree.

Best regards,
-Ivan Salazar
Applications Engineer

Amplifiers

Amplifiers forum

TAS2563: Amplifer