• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 459 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA198

Calum Mackinnon
Genius 4155 points
Other Parts Discussed in Thread: INA198, INA282

Hi,

Is there an evm for the INA198?

Calum

  • 0
    TI__Mastermind 25865 points

    Hello Calum,

    Thank you for considering the INA198 for your design.  We do not have an EVM for the INA198.  However, it can be evaluated by mounting the device on a SOT23-5 to DIP adapter board in conjunction with a breadboard.

    Please let me know if you have any further questions.

  • 0
    TI__Mastermind 25865 points

    Hello Calum,

    I forgot to mention that you may be interested in also evaluating the INA282, which has an EVM.  In comparison to the INA198, the INA282 has a slightly smaller common-mode voltage range (-14V to 80V) and bandwidth (10kHz), but has significantly less offset voltage (merely 70uV maximum).  You will also have to adjust your shunt value for the gain is 50V/V as opposed to 100V/V.

    Please let me know if you have any further questions.