OPA355

eli

Other Parts Discussed in Thread: OPA355

one of our customersis using ther OPA355 but unfortunately it is not good enough for my 0-2V 80MHz clipped sin wave signal…

can you recommend for similar OpAmp with same footprint (SOT23) to OPA355 but that is more suitable 80MHz signal?

over 13 years ago

0 Jeff Harris over 13 years ago

Intellectual 670 points

Could you provide a schematic for review? What are the supply voltages used and what is the input & output of the amp? The OPA355 may be suitable with some changes to the circuit.

If you'd like to look at our other offerings, here's a list of all the high speed amps in the SOT23 package:

http://www.ti.com/paramsearch/docs/parametricsearch.tsp?family=analog&familyId=72&uiTemplateId=NODE_STRY_PGE_T#p494=5SOT-23;6SOT-23

0 eli over 13 years ago in reply to Jeff Harris

Guru 13485 points

Hi,

Can you provide your e-mail so I can send you the schematics +related d/s?

B.regards

Eli

0 Jeff Harris over 13 years ago in reply to eli

Intellectual 670 points

Eli,

You can email those to me directly at: <>@ti.com.

Amplifiers

Amplifiers forum

OPA355