This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA358

Other Parts Discussed in Thread: OPA358, OPA354

Hi!

I have a question about OPA358 operational amplifier. I made design for low pass anti aliasing filter in Webench designer and i set the suplly voltage at 5V, single supply. Aplication returned me design with OPA 358, but its data sheet says supply voltage is max 3.3volts. So probably i should change it with another amplifier, because my circuit is designed for 5volts. Any sugestions?AA filter webench.pdfThank you very much