LMV321 / absolute maximum ratings

K.Yaita

Hi Team,

Is it possible to apply voltage to IN+(or IN-) pin more than Vcc(supply voltage)?
I believe it is no ploblem if the voltage is -0.2～5.7V.
Is my understanding correct?

Best Regards,
Yaita / Japan disty

over 9 years ago

0 K.Yaita over 9 years ago

Guru 29720 points

Your support would be appreciated.

Best Regards,
Yaita

0 Ron Michallick over 9 years ago

TI__Guru**** 170936 points

Yaita-san,

It would be best is Vi range said -0.2V to VCC + 0.2V.
There is a ESD diode from all pins to VCC.

An input resistors would be needed to limit current flow and the the VCC bus would need to use the current.

Amplifiers

Amplifiers forum

LMV321 / absolute maximum ratings