LMH6502 / pin 13 (NC pin)

Masanori Tachibana

Other Parts Discussed in Thread: LMH6502

Dear all,

Please tell me whether or not it would be OK to add voltage to Pin 13 of LMH6502 even though it is NC pin.
In Figures 61 and 62 of datasheet (page 19), pin 13 is tied to pins 1 and 14 which are connected positive Vs.
Are those circuits no problem?

Best regards,
M. Tachibana

over 8 years ago

0 Hooman Hashemi over 8 years ago

TI__Mastermind 22825 points

Hi Masanori,

Yes, the LMH6502 pin 13 can be tied to a voltage node (or left floating) as it is in fact not bonded internally.

Regards,

Hooman

0 Masanori Tachibana over 8 years ago in reply to Hooman Hashemi

Genius 5350 points

Dear Hooman-san,

Thank you for your reply.
I understood that it's OK to connect LMH6502 pin 13 to both voltage node and nothing.
It was very helpful.

Best regards,
M. Tachibana

Amplifiers

Amplifiers forum

LMH6502 / pin 13 (NC pin)