Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 539 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV8802: Negative Common Mode

Mark Ackerson
Genius 10190 points
Part Number: TLV8802
Other Parts Discussed in Thread: OPA2369, TLV2402, LPV542

Can the TLV8802 input common mode voltage extend slightly (100 mV) below the low voltage rail? The data sheet limits the VCM from 0 - 4.1V so I suspect the answer is no.  But wanted to confirm.

If not, can you suggest another low cost, nano power amp that can extend below the negative rail?

Thanks,
Mark