LMP7715: LMP7715 doesn't have footprint

Intellectual 625 points

Part Number: LMP7715
Other Parts Discussed in Thread: TLV333

LMP7715 doesn't have footprint on the BXL file in the site.

over 5 years ago

0 Dennis Goeke over 5 years ago

TI__Genius 11135 points

Ismail

Please check CAD/CAE symbols under the Quality and Packaging tab at the bottom of the page. Here's the link:
www.ti.com/.../pinout-quality

Regards
Dennis

0 as over 5 years ago in reply to Dennis Goeke

Intellectual 625 points

I know it didn't you read the question?
app.ultralibrarian.com/UploadBXL
Footprint is unavaiable. I need it thanks.

0 Dennis Goeke over 5 years ago in reply to as

TI__Genius 11135 points

Ismail

I see the issue. I will need to notify the modeling team...
I'm not sure how long this will take, but I expect at least a week.
I'll reply as soon as I can.

Dennis

0 as over 5 years ago in reply to Dennis Goeke

Intellectual 625 points

Is there any other opamp footprint avaible in same package so I can use as alias.

0 Dennis Goeke over 5 years ago in reply to as

TI__Genius 11135 points

Ismail

Sure, many of our opamps use this package. I just happened to be looking at the TLV333 and it has the correct footprint in the .bxl file. See here:
www.ti.com/.../pinout-quality

Regards
Dennis

0 Dennis Goeke over 5 years ago in reply to Dennis Goeke

TI__Genius 11135 points

Ismail

I've been notified (and I have checked) that the footprint for the LMP7715 has been updated.

Regards
Dennis

Amplifiers

Amplifiers forum

LMP7715: LMP7715 doesn't have footprint